The Keenan Orbital Spreader is a heavy-duty versatile spreader. It is capable of very high work rates, trouble free operation with a wide range of farm and commercial wastes, and delivers a remarkably uniform spreading pattern.
Features
- Upgraded Rear Pushing Door
- Slurry Door Design
- Wear Plates
- Revised Spinner Design
- Greater Spreading Control
- Simplified Hydraulic Control
- Road Speed
- Drive Chain Oil Bath
Upgraded Rear Pushing Door
Adjustment of pivot points and introduction of second hydraulic ram increases pushing power as spreading commences.
Slurry Door Design
Simple and fast operation with this maintenance free door that pivots upwards, using two hydraulic rams, allowing material to pass underneath.
Wear Plates
Flywheel features bolt on hardened wear plates and hammer tips that are easily reversed or replaced.
Revised Spinner Design
Incorporating upgraded bearings and seals, this flush fitting disk with 3 paddles has been designed not to collect twines or plastic when spreading material.
Greater Spreading Control
Hydraulic flow valve provides even finer spreading control, with 40 incremental settings.
Simplified Hydraulic Control
Using sequence valve and manifold block to operate the side door, slurry door and rear pushing door, only 2 spool valve and 2 couplings are required on the tractor.
Road Speed
Heavy-duty axle, increased breaking efficiency and tyre specification allows the Orbital to travel at 25km/h on the road.
Drive Chain Oil Bath
Gives increased chain life and eliminates routine maintenance of the drive system.